Composition & material selection
Expanded PTFE sheet and joint-sealant forms for compliant static sealing. Specify flange condition, compression and the material construction for the joint.
Grade characteristics
Use the complete material designation and service conditions when evaluating a compound.
| Material form | Expanded PTFE sheet or joint-sealant format |
|---|---|
| Primary use | Compliant static sealing between supported faces |
| Selection inputs | Flange condition, stiffness and available bolt load |
| Construction detail | Density, thickness and expansion structure |
| Fit detail | Gasket outline or specified sealant path |
Expanded PTFE has a structure that allows a sealing form to conform to the mating surface under compression. It is considered where the supported joint benefits from a compliant gasket.
Sheet-cut gaskets and form-in-place sealant strips have different installation details. Specify the supplied format and joint geometry rather than combining them under one stock dimension.
Expanded materials differ by density and structure. Their compression and load-retention behavior must come from the supplied product, not a general PTFE property table.
A gasket still relies on the flange and bolting arrangement. Include surface condition, stiffness and the operating cycle when comparing dense PTFE with an expanded construction.
Specific answers
It is a different structure intended here for compliant sealing. It is not an interchangeable dense machining stock.
No. Sheet and strip formats differ. Any positioning adhesive must be specified separately from the sealing material.
Select by composition
Provide the flange dimensions, surface condition, gasket or sealant format, media and temperature. Include the required construction and material documentation.
Send Material & Application DetailsContinue with the right requirement